Face Mount I- Joist Hangers ---Structural Connectors

Structural Connectors YC-J-01 series face mount hangers have speed prongs for temporary placement and seat cleats to grab the bottom flange of the supported I-joist. Different holes and joist allow for optional nailing for customized fastening to match allowable load needed. Install nails in all fastener holes when the Max allowable load is needed while lighter load capacities can be achieved with a quick installation of nails in the round holes only. It saves you time and money on the job site.
Joist hangers are designed to provide support under the joist, rafter or beam to provide a strong connection, ensure the joists are reinforced. As the joists deteriorate over time, metal joist hangers will last and continue to strengthen the structure.

Features of this Joist Hangers :
• Seat Cleats lock bottom chord of I-joist eliminating need for joist nails.
• Dimples with nail holes for optional joist nailing when higher uplift loads are needed.
• Min/Max nailing provide flexible installation options.

Installation of this Structural Connectors:
Use all specified fasteners.
Position I-joist into hangers and tap or push into place to fully seat 
joist and engage cleats.
• Web stiffeners are not required unless specified by the 
I-joist manufacturer. 
• Min Nailing – Fill all round nail holes.
• Max Nailing – Fill all round and additional holes.